Sensor 230V AC 1W-UNI

The sensor is designed for measuring of AC voltage in the range 100 – 250V AC. The 1W-uni output bus is isolated. Typical usage of sensor contains voltage variation or drop out detections. Measured values are processed by Poseidon2 (LAN) or Ares (GSM) units, to be accessible for monitoring apps.
Features:

  • 100-240V AC Sensor
  • 1-Wire UNI output for connection to Poseidon2 and HWg-Ares units
  • Accuracy 5%
  • Resolution 1V
  • Measuring period approximately 1s
  • 1-Wire electrically isolated from the mains part
  • Designed for installation on a DIN rail (2-modules wide)
  • Mechanical dimensions 88 x 64 x 37 mm
  • Applications and usage:
  • Monitoring of mains voltage fluctuations.
  • Mains voltage monitoring over a long period.
  • Detection of mains voltage presence.,/li>
  • Monitoring of power supply at the input or the output of a UPS.

  • Meter 3f PRO380-Mb 100A M-Bus

    PRO380-Mb is a static three-phase electrocity meter 100A with M-Bus. The PRO380 energy meters are available in a standard, 2-tariff with M-bus and pulse output.The PRO380 energy meter displays a number of instantaneous variables such as voltage, current, active power, reactive power, apparent power, frequency and power factor on the LCD and some via M-Bus. The PRO380 energy meters comply with the Measuring Instruments Directive 2014/32/EU. The MID approval ensures the accuracy and quality of the meter and enables its use in billing purposes SKU:600763


    Meter 1f PRO1-Mb 45A M-Bus

    Single-phase electrocity meter 45A with M-Bus. The PRO1 energy meters are available in a standard, 2-tariff with M-bus and pulse output.The PRO1 energy meter displays a number of instantaneous variables such as voltage, current, active power, reactive power, apparent power, frequency and power factor on the LCD and some via M-Bus. The PRO1 energy meters comply with the Measuring Instruments Directive 2014/32/EU. The MID approval ensures the accuracy and quality of the meter and enables its use in billing purposes. Accessories producer: Inepro / DMMetering SKU:600761


    M-Count 2C

    2x S0 datalogger and converter to M-Bus (2x pulse input (S0) / M-Bus output)
    Features:

  • Power Supply: M-Bus, in case of M-Bus failure from the internal lithium battery
  • Current consumption: approx. 50μA when battery operated, 1.5mA from M-Bus network
  • Battery lifetime: for consumption 0.23mAh from battery, approx. 200 days in case of M-Bus failure
  • Digital inputs: double signal inputs (S0 optional), 50Hz samping cycle (˂30 ms for S0)
  • Tariff signal: through change-over contact to TS channel or 250 VAC through ACT input
  • Interface: M-Bus according to EN1434-3 standard, 2400 baud
  • Temperature range: -20° up to +65°C
  • Mounting: Industrial DIN-rail 35mm – acc. to EN 50022 standard
  • Dimensions: 1-module size (1 – TE = 18 mm), 82x63x17.5 mm

  • Applications and usage:
  • Collecting of impulses from gas-, water-, electricity- or other meters and field units with pulse output or electrical outputs of of type S0.
  • SKU:600481

  • Get In Touch

    Nexus World Technology

    Burwood, NSW, 2134, Australia

    Email: admin@nexusworld.com.au

    Contact: 1300 88 90 80