x

100A (30A) DC Current probe 1W-UNI

100A (30A) DC Current probe 1W-UNI is a set of shunt and converter that can measure DC current up to 100A (30A). The shunt is connected directly (interrupting the wire) into measured circuit. The DC current is measured in both directions (distinguished by the sign). The 1W-UNI output can be connected to Poseidon2 or Ares devices. Together with one of these units, the current probe can serve early warning f overload or current direction change (charge/discharge). The probe is suitable for input power monitoring in 12V / 24V or 48V DC powered systems, providing battery charging or energy consumption monitoring in telco applications.

Features:

Current range 0-100A DC; Resolution 0.1A; Measurement accuracy 2% Shunt resistance / loss by 100A (100A version) 0,6 mOhm/60 mV; by 30A (30A version) 2 mOhm/60 mV

The 1-Wire UNI bus is electrically isolated from the measured circuit

Measured voltage max. 60V

Cable length between the shunt and the converter 1m

Bus-powered (1-Wire UNI), max. 2 sensors per active port

1-Wire UNI (2x RJ11 for daisy-chaining)

Connects to Poseidon2 or Ares devices

Converter to be installed indoors

Applications and usage:

In combination with Poseidon2 and Ares units this probe can be used for overload or change of DC current direction monitoring:

in big UPSs

in telecommunications devices

in railways

etc.

x

30A Current probe 1W-UNI 2: Sensor for indirect single-phase measurement of AC current up to 30A without cutting the wire

30A Current probe 1W-UNI 2 is a sensor for indirect single-phase measurement of AC current up to 30A without cutting the wire. The split-core current transducer can be opened in order to insert a line wire. The sensor is suitable for monitoring power consumption of racks, BTS’s or server rooms. Sensor is suitable for Poseidon and, Ares product family.

Features:

Current range of the transducer: 0–30A

Measurement accuracy: 2%

Electrical isolation: The 1-Wire UNI bus is

electrically isolated from the measured circuit.

A/D converter resolution: 16 bits

Display resolution: 0.1A

Measured voltage: max. 400V

Measurement without cutting the measured wire

Operating temperature/humidity: 0°C to 40°C (32°F to 104°F), RH < 80%

Storage temperature/humidity: -10°C to +50°C (14°F to 122°F), RH < 70%

The length of lead wire between the transformer and converter: 1m

Applications and usage:

The current transducer (“CLAMP METER”) clamps around the line (L) or neutral (N) wire carrying the measured current.

The wire under measurement must be insulated!

The “CLAMP METER” and “Converter” must be connected using a double insulated wire.

x

HTemp-1-Wire Outdoor

Temperature (-30°C to +85°C) and humidity sensor for outdoor use, communicating over the 1-Wire bus. The sensor is designed for connecting to Poseidon2, Ares and STE2 devices.

Features:

Current range of the transducer: 0–30A

Combined temperature (-30°C to +85°C) and humidity sensor

3m connection cable

Daisy chaining using a T-Box unit

Sensor for ourdoor use

Applications and usage:

Outdoor monitoring of temperature and humidity

x

HTemp-1Wire 3m

Digital temperature (-30°C to +80°C) and humidity sensor for indoor and outdoor use. RJ11 (1-Wire) interface. Designed for connection with Poseidon, Ares and HWg-STE units.

Features:

Combined temperature (-30°C to +80°C) and humidity sensor

3m cable, daisy chaining using a T-Box unit

Sensor for installation to IT cabinets

Applications and usage:

Can be used in rack

Monitoring of temperature and humidity in industrial areas

Horizontal menu

x

HTemp-1Wire Rack 19<

Combined temperature (-10°C to +80°C) and humidity probe for IT environment (1-Wire bus). Fits into a 19" or 10" cabinet (1U size). 2 RJ12 connectors for daisy chaining the sensors, RJ12 cable included. Sensor can be placed to the front or to the back as a 1U device, or fixed to the wall. Designed for connection with Poseidon, Ares and HWg-STE.

Features:

Combined temperature (-10°C to +80°C) and humidity sensor

1U rack mount, 2x RJ11, daisy-chainable

3m connection cable included

Temperature and humidity measuring in both IT and home environment

Applications and usage:

Monitoring of temperature and humidity in IT cabinets (racks)

Monitoring of temperature and humidity in server rooms

x

HTemp-1Wire Rack 19<

Combined temperature (-10°C to +80°C) and humidity probe for IT environment (1-Wire bus). Fits into a 19" or 10" cabinet (1U size). 2 RJ12 connectors for daisy chaining the sensors, RJ12 cable included. Sensor can be placed to the front or to the back as a 1U device, or fixed to the wall. Designed for connection with Poseidon, Ares and HWg-STE.

Features:

Combined temperature (-10°C to +80°C) and humidity sensor

1U rack mount, 2x RJ11, daisy-chainable

3m connection cable included

Temperature and humidity measuring in both IT and home environment

Applications and usage:

Monitoring of temperature and humidity in IT cabinets (racks)

Monitoring of temperature and humidity in server rooms

x

HTemp-1Wire Rack 19<

Combined temperature (-10°C to +80°C) and humidity probe for IT environment (1-Wire bus). Fits into a 19" or 10" cabinet (1U size). 2 RJ12 connectors for daisy chaining the sensors, RJ12 cable included. Sensor can be placed to the front or to the back as a 1U device, or fixed to the wall. Designed for connection with Poseidon, Ares and HWg-STE.

Features:

Temperature monitoring range -10°C až +70°C

Air humidity range 0 - 100%

Adress of probe can be set by sw or hw method

RS-485 bus provides range up to 1000 m

High energy efficiency, the Poseidon2 4002 can supply up to 4 sensors

Applications and usage:

Wide-range monitoring systems with number of measurement points

Smart buildings HVAC and environment monitoring

Independent monitoring of food and crop stores

Food manufacturing and processing

Temperature and humidity monitoring of medical material and pharmaceutical stores

Environmental monitoring of residential areas

Industrial monitoring and control

Connection to Poseidon unit– temperature monitoring over Ethernet/Internet

Connection to Poseidon unit – saving up to 100 000 logs into internal Flash memory.

x

HTemp-485 T3411

Temperature and humidity sensor HTemp-485 T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. Based on temperature and humidity measured, sensor can calculate the dew point, absolute humidity or specific humidity. Temperature range -30°C. - +80°C. The sensor can be used alone or with Poseidon units.

Features:

Temperature and humidity probe with RS-485 connectivity and a display showing actual values

LCD display

Additional units indication and calculation

Easy wall mounting

IP65/40 protection

Applications and usage:

Wide-range monitoring systems with number of measurement points

Outdoor temperature monitoring

Wide-range monitoring systems with number of measurement points

Industrial monitoring and control

Food manufacturing and processing

Environmental monitoring of residential areas

x

HTemp-485 T3419

Temperature and humidity sensor HTemp-485 T3419. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. Based on temperature and humidity measured, sensor calculate dew point, absolute humidity or specific humidity. Temperature range -30°C to +105°C. The sensor can be used alone or with Poseidon units.

Features:

Temperature and humidity probe with RS-485 connectivity and a display showing actual values

Display on the sensor body, showing actual measured values

Easy wall mounting

IP65/40 protection for outdoor use

Applications and usage:

Wide-range monitoring systems with number of measurement points

Outdoor temperature monitoring

Wide-range monitoring systems with number of measurement points

Industrial monitoring and control

Food manufacturing and processing

Environmental monitoring of residential areas

x

Light 1Wire-UNI

Simple light intensity sensor for indoor use. The sensor is designed for use with Poseidon and Ares devices via 1-Wire UNI bus (RJ11).

Features:

Output 0% to 100%.

Several sensors can be connected in parallel (each sensor has a unique serial number)

to connector Rj11 very easy and quick installation

Applications and usage:

Connect the probe to a Poseidon unit and receive an e-mail every time someone enters the room (and turns on the light) or leaves (turns off the light).

Connect the probe to an Ares unit for indicative monitoring of photovoltaic panel illumination.

Can be used for simple detection of access to a cabine.t

Poseidon makes the illumination intensity accessible through SNMP, Modbus/TCP, or other protocols.

Horizontal menu

x

probe Pt100 TG8

–50°C to 200°C, Pt100/A, 2m silicon cable, stainless steel tube.Temp-1W-Pt100 Cable contains a Probe Pt100 TG8 2m (–50°C to 200°C, Pt100/A, 2m silicon cable, stainless steel tube) and a 1-Wire UNI converter (Converter 2xPt100 1W-UNI).

x

Sensor 0-20mA 1W-UNI: Isolated DC current sensor for the 1Wire-UNI bus

Isolated DC current sensor for the 1Wire-UNI bus. Sensor for measuring currents in the 0–20mA range. It is typically used to connect an industrial probe with 4–20mA output - 4wire with a discrete power supply (e.g. to measure the fuel level in a tank). The sensor current output is processed in Poseidon2 or Ares units to ber accessible via LAN or GSM. The sensor is equipped with an 8-points calibrating table/curve to set measured output appropriate to related industrial sensor. The calibration process is supported by 1W-UNI USB calibrator.USB dongle. For two-wire industrial sensors 4-20mA use alternative Senzor 4-20mA 1W-UNI,

Features

Input: 0-20mA (connect a “source” type of probe).

Electrical isolation: Yes

Protection: 63 mA fuse

Options: Unit conversion, calibration

Interface: 1-Wire UNI (2x RJ11 for daisy-chaining)

Connects to: Ares 12/14, Poseidon2 or Poseidon 2250

Environment: Converter to be installed indoors

Power: Bus-powered (1-Wire UNI) – max. 2 sensors per active port

Applications and usage:

Connecting industrial sensors to Poseidon or Ares systems

Connecting current transformers

Connecting electronic scales

Measuring the concentration of CO2 or other gases

Connecting pressure transducers or other industrial sensors

x

Sensor 230V AC 1W-UNI

The sensor is designed for measuring of AC voltage in the range 100 - 250V AC. The 1W-uni output bus is isolated. Typical usage of sensor contains voltage variation or drop out detections. Measured values are processed by Poseidon2 (LAN) or Ares (GSM) units, to be accessible for monitoring apps.

Features

100-240V AC Sensor

1-Wire UNI output for connection to Poseidon2 and HWg-Ares units

Accuracy 5%

Resolution 1V

Measuring period approximately 1s

1-Wire electrically isolated from the mains part

Designed for installation on a DIN rail (2-modules wide)

Mechanical dimensions 88 x 64 x 37 mm

Applications and usage:

Monitoring of mains voltage fluctuations.

voltage monitoring over a long period.

Detection of mains voltage presence.

Monitoring of power supply at the input or the output of a UPS.

x

Sensor 4-20mA 1W-UNI: Isolated DC current sensor for the 1Wire-UNI bus.

Isolated DC current sensor for the 1Wire-UNI bus. Sensor for measuring currents in the 0–20mA range. It is typically used to connect an industrial probe with 4–20mA output - 2wire current loop ("sink"type). Sensor current output is processed in Poseidon2 or Ares units to ber accessible via LAN or GSM. The sensor is equipped with 8-points calibrating table/curve to set measured output appropriate to related industrial sensors. The calibration process is supported by 1W-UNI USB calibrator.USB dongle. For 4-wire industrial sensors 0-20mA use alternative Sensor 0-20mA 1W-UNI.

Features

Input: 4-20mA (connect a “sink” type of probe).

Electrical isolation

Protection: 63 mA fuse

Options: Unit conversion, calibration

Interface: 1-Wire UNI (2x RJ11 for daisy-chaining)

Connects to: Ares 12/14, Poseidon2 or Poseidon 2250

Environment: Converter to be installed indoors

Power: Requires an external 12-30V supply.

Applications and usage:

Connecting industrial sensors to Poseidon or Ares systems

Measuring fuel level in a tank

Measuring the concentration of CO2 or other gases,/li>

Connecting pressure transducers, pH sensors, or other industrial sensors

x

Sensor 60V 1W-UNI v2: Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output.

Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output. Typical applications include measuring the voltage at industrial sensors (0-10V) or battery voltage. Frequently used for 48-volt power supply measurements in telecommunications (48V standard). Voltage can be monitored over LAN ( Poseidon2 or GSM (Ares). The sensor is equipped with an 8-points calibrating table/curve to set measured output appropriate to related industrial sensors. The calibration process is supported by 1W-UNI USB calibrator.USB dongle.

Features

0 - 60V DC voltage monitoring

High measuring accuracy (can be used also for 0–10V)

Sensors can be daisy-chained (two RJ11 connectors)

Powered from the 1-Wire UNI bus (RJ11) or from an external power adapter

Sensor can measure also negative voltages from 0 to –60VDC

Applications and usage:

Battery voltage monitoring in telecommunication systems (telco –48V)

Independent measurement of individual battery cells (electrically isolated)

12V or 24V car battery voltage sensor

Signal converter for 0-10V industrial sensors

DC current sensor in -48V systems (with a current sensing resistor)

x

Temp-485-Pt100 Cable3

Temperature probe on a cable with a RS-485 converter in a wall-mount box. The probe (included) is on a 2m cable in a stainless-steel rod. The sensor can be used separately or connected to a Poseidon2 4002 unit.

Features

Environment: Indoor or outdoor use – IP65, wall mount

Supplied probe: External Pt100 temperature probe (stainless steel housing, 2m cable)

External probe measured temperature range: –50°C to +200°C (–58°F to +390°F)

Operating temperature: The converter works from –30 to +70°C (–22 to +160°F)

Interface: RS-485, terminals

Compatible with: Poseidon2 4002

Power supply: From the Poseidon (12V), or 10..35VDC

Applications and usage:

Typical applications include measuring temperature in places that can be flooded with water, or an environment with moisture condensation.

x

Temp-1W-UNI Pt100 Cable

Pt-100 based temperature sensor with 1-Wire UNI output. It contains a Pt-100 probe (-50°C to 200°C, Pt100/A, 2m silicon cable) and a 1-Wire UNI converter (Converter 2xPt100 1W-UNI). The second Pt-100 or Pt-1000 probe can be connected.

x

Temp-485-Pt100 Cable3

Temperature probe on a cable with a RS-485 converter in a wall-mount box. The probe (included) is on a 2m cable in a stainless-steel rod. The sensor can be used separately or connected to a Poseidon2 4002 unit.

Features

Environment: Indoor or outdoor use – IP65, wall mount

Supplied probe: External Pt100 temperature probe (stainless steel housing, 2m cable)

External probe measured temperature range: –50°C to +200°C (–58°F to +390°F)

Operating temperature: The converter works from –30 to +70°C (–22 to +160°F)

Interface: RS-485, terminals

Compatible with: Poseidon2 4002

Power supply: From the Poseidon (12V), or 10..35VDC.

Applications and usage:

Typical applications include measuring temperature in places that can be flooded with water, or an environment with moisture condensation.

x

WLD sensing cable A - 2+2m

Water leak detection cable A - 2+2m for use with HWg-WLD and HWg-WLD Relay.

Features

Detection cable A - 2+2m (2m connection cable + 2m sensing cable + end termination)

Detects even the smallest volume of liquid (Detection of water, ethylene glycol or other conductive liquid)

Water detection in the whole range of the sensing part

Sensor can be connected to HWg-WLD or HWg-WLD Relay

Detection cables can be combined and prolonged to up to 85 meters

Soaked detection cable can be dried and reused

Applications and usage:

Universal water detection in any environment

Can be put on the floor, wrapped around pipes or attached to a wall.

x

WLD sensing cable A - 2+50m

Water leak detection cable A - 2+50m for use with HWg-WLD and HWg-WLD Relay.

Features

Detection cable A - 2+50m (2m connection cable + 50m sensing cable + end termination)

Detects even the smallest volume of liquid (Detection of water, ethylene glycol or other conductive liquid)

Water detection in the whole range of the detection part

Sensor can be connected to HWg-WLD or HWg-WLD Relay

Detection cables can be combined and prolonged to up to 85 meters

Soaked detection cable can be dried and reused

Applications and usage:

Universal water detection in any environment

Can be put on the floor, wrapped around pipes or attached to a wall.

x

WLD sensing cable A - 2m

Water leak detection cable A - 2m for use with HWg-WLD and HWg-WLD Relay.

Features

2m detection cable for prolonging the sensing part of a cable between connection cable and an end termination

Detects even the smallest volume of liquid (Detection of water, ethylene glycol or other conductive liquid)

Water detection in the whole range of the sensing part

Sensor can be connected to HWg-WLD or HWg-WLD Relay using a connection cable

Detection cables can be combined and prolonged to up to 85 meters

Soaked detection cable can be dried and reused

Applications and usage:

Universal water detection in any environment

Can be put on the floor, wrapped around pipes or attached to a wall.